Working On That Squish Hello Everyone, This is a photo of what I consider to be "perfect squish." Printed with clear TECBEARS filament to give the viewer a look at how high the layer squish should

Hello Everyone, Earlier today I posted about the trouble I was having with my printer settings. (The Blob) I decided to start with fresh stock settings. Sometimes this is my troubleshooting method when

Hello Everyone, Today I am deleting my Cura profile (user defined printer presets) and starting over from scratch. This is why: What is that thing!? I'm going to name it The Blob, because that's what it

Hello Everyone, I've been working tirelessly for the past few days to bring some kind of epic 3D printing content to the Hive blockchain. Unfortunately I have not reached that point yet, and have gone

Hello Everyone, Today I'm taking a break from the more technically involved posts to share my latest design. It's a simple flowerpot and it is going to be used in my indoor garden. I designed it in

Hello Everyone, Today I've been working on adjusting the Z-Offset through Fluidd Pi. (github) This offset is a temporary setting that I will need to ensure is set with every print, until I work out a more

Hello Everyone, Today I'm going to be running some retraction tests with SuperSlicer (github), which is a program that takes 3D models and converts the file into a code that 3D printers can print. (For

Hello Everyone, Today I'm preparing for calibration on the Ender 3 V2. Specifically retraction, which I will discuss in further detail later in this blog. But to calibrate retraction, we will need to change

Hello Everyone, I'm @print3dpro, Your typical introverted internet nerd. I started 3D printing a few months ago with an Ender 3 V2, and realized quickly that 3D printing is very involved with multilayer