Well first of. It has proven to be a lot more work than I thought. First there was the software. I downloaded fusion 360 and learned how to set up a relief milling job, but never reaaly liked it. first

I was never good at documenting my work but every once in a while I remember to set up the camera before I start. This time I was working on my current project with @katharsisdrill on making merchandize

A while back I decided to start posting some of my 3d designs on thingiverse, and some other sites. It was mainly meant as an experiment but also as a means to try and generate some attention to some of

We have passed solstice and now it is going towards lighter days. It is still dark from five o'clock in the afternoon to around seven or eight o'clock in the morning, But even so I tell myself I can feel

Happy New year everybody. I started my new years day in the same way i always do by participating in the annual local new years run. I ran 5 kilometers, there is also the possibility to run 10 but since

I have had my Ultimaker 2 for a few years now and it has turned out to be an excellent investment. it runs smoothly and with no troubles almost every time. But even the most stable machine needs a little

As some of you may have noticed I have started a project together with @katharsisdrill called @olde-steemshop. The idea is to sell some of our own creations for steem as well as facilitating that other

I am not much af a garden person. I tend to be more interested in things that I can construct and build than things that grow I do like plants that are edible though and I do enjoy being outside very much.

While I wait for my new milling bits to arrive from france, I have tested the machine using the normal (big) router bits that I had. It is essentially a remake of the first test I made in foam, but this

I have never been too fond of Autodesk as a company. I find their licensing to be very restricting and somewhat intrusive, especially when it comes to Maya (with which I have had the most experience) for

And so the journey can continue. My spindle/router arrived two days after the cnc-frame and so I could get on with doing my first job. The very first job could have been done without the spindle since

I admit I am a bit of a makergeek. Well in fact thats a great understatement. I already own 2 3d printers, and build all kind of things whenever i get the chance. If you have followed this account just

Sometimes I just need a break from the internet, or at least parts of it. This time it was steemit that got hit. I have not been posting for quite a while. Mostly because I have been very busy at work

Battleworn metal has a charm of its own. It isnt pretty or nice to touch. it is actually quite ugly, but ugly in a utilitarian way. My fencing club has just bought new nylon training swords and so it is

Or the week before for that matter. One thing most of my projects have in common is that they take time and preparation to do. It might take me an hour or even less to write the steemit-post, but doing

This goes for both the weather, which is cloudy and around 20-25 degrees centigrade and for my work life. Vacation is over and I started work again today. Luckily the temperature in our office is a bearable

I enjoy my vacation and so I dont post as much right now. I do however, want to show you the painted dwarf from earlier So here is a few frames from different angles. I hope you liked them. Thanks for

I dont have a lot to say about this one. I got it printed in app. 9 cm height and painted it so I thought , might as well do a turntable gif of it its not perfect by a long stretch, neither the model nor

What did you win I hear you all screaming. Or maybe I don't, but I wish I did :-) Anyways here it comes. Recently I have rebooted my research career. I have become involved in a few, quite interesting

Such a beautiful lady deserves a life of her own. I can not keep her confined to pixels and voxels. It was about time I got her printed. For the puritans out there (and for not getting an adult tag at